The breaker off and I always double-check with a multimeter and make sure there is no current I do not want to be injured and set myself off of that ladder and fall down because I’m going to be up probably feet pitch in my roof inside here is feet I got a little bit higher on the outside so I want to be at least feet off.
The ground so if I get zapped and lose my footing fall backwards I could break a leg on the ladder fall down get certainly injured don’t want that happen safety is a priority do not rlm light fixtures touch any wiring until you have verified there is no current a halo led area and wall light the LEDs supposedly we don’t know for sure only.
Time can tell supposedly has a year maintenance-free operation meaning you should have years on an average of hours a night of light the brilliant white is k meaning it not a rule light fixtures yellowish hue, not a reddish hue orange whatever it is a white glow and this also has the option of being mounted on a pole if this thing is setting at feet high which it is between and feet on the side of my shop from the center width wise I should have a complete width of feet wide.
Improve(Increase) Your rlm light fixtures In 3 Days
From my shop door out it should light up at least two feet before we go out there I only go through this real quick just to see what we have to make sure have everything let’s rim light fixtures open this up get everything out of it and go through real quick there are another mounting hardware three screws and that is light it is really really light compared to the other one that’s like pounds is petty this is a couple pounds definitely metal your plastic and.
Then the LED and for a diagram if you look on the lid rim light fixtures there’s actual diagram for the mounting so you can probably cut this offset somewhere and mark your three holes that are nice that is.
It that’s everything I mean Tumblr very simple there’s not rlm light fixtures much to it that all can go so we have three wire nuts for your wires three screws and of course we have our instructions before I get up there I’m going to check my multimeter make sure it’s working properly so I’m going to turn this too and the VAC volts AC not DC AC for the house it’s not I have an extension cord that I know it is life.